Sharp MX-B467P User Manual Download Page 98

Page: 98 / 132

Action

Yes

Step 1

Check if the printer is using a genuine and supported toner
cartridge.

Note:

If the cartridge is not supported, then install a

supported one.

Print the document.

Do horizontal light bands appear on prints?

Go to step 2.

The problem is
solved.

Step 2

Turn off the printer, wait for about 10 seconds, and then turn on
the printer.

Print the document.

Do horizontal light bands appear on prints?

Contact your

dealer

. The problem is

solved.

Incorrect margins

Note:

Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings

Troubleshooting

Print Quality Test Pages

. For non-touch-screen printer models, press

navigate through the settings.

Action

Yes

Step 1

Adjust the paper guides to the correct position for the paper
loaded.

Print the document.

Are the margins correct?

The problem is
solved.

Go to step 2.

Troubleshooting

Summary of Contents for MX-B467P





































































































































Search results

Summary of Contents for MX-B467P

Reviews:

Related manuals for MX-B467P

Brands by name

Popular brands

Sharp MX-B467P, User Manual

Search results

Summary of Contents for MX-B467P

Reviews:

Related manuals for MX-B467P

Brands by name

Popular brands