Sharp MX-B427PW User Manual Download Page 78

Page: 78 / 131

Troubleshoot a problem

The printer is not responding

Action

Yes

Step 1

Check if the power cord is connected to the electrical outlet.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or

electrical shock, connect the power cord to an appropriately
rated and properly grounded electrical outlet that is near the
product and easily accessible.

Is the printer responding?

The problem is
solved.

Go to step 2.

Step 2

Check if the electrical outlet is turned off by a switch or breaker.

Is the electrical outlet turned off by a switch or breaker?

Turn on the switch or
reset the breaker.

Go to step 3.

Step 3

Check if the printer is on.

Is the printer on?

Go to step 4.

Turn on the printer.

Step 4

Check if the printer is in Sleep or Hibernate mode.

Is the printer in Sleep or Hibernate mode?

Press the power
button to wake the
printer.

Go to step 5.

Step 5

Check if the cables connecting the printer and the computer are
inserted to the correct ports.

Are the cables inserted to the correct ports?

Go to step 6.

Insert the cables to
the correct ports.

Step 6

Install the correct print driver.

Is the printer responding?

The problem is
solved.

Go to step 7.

Step 7

Turn off the printer, wait for about 10 seconds, and then turn on the
printer.

Is the printer responding?

The problem is
solved.

Contact your

dealer

Troubleshoot a problem

Summary of Contents for MX-B427PW




































































































































Search results

Summary of Contents for MX-B427PW

Reviews:

Related manuals for MX-B427PW

Brands by name

Popular brands

Sharp MX-B427PW, User Manual

Search results

Summary of Contents for MX-B427PW

Reviews:

Related manuals for MX-B427PW

Brands by name

Popular brands