Menu item
Description
Network Address
UAA
LAA
View the network addresses.
PCL SmartSwitch
On*
Off
Set the printer to switch automatically to PCL emulation when a print
job requires it, regardless of the default printer language.
Note:
If PCL SmartSwitch is off, then the printer does not examine
incoming data and uses the default printer language specified in
the Setup menu.
PS SmartSwitch
On*
Off
Set the printer to switch automatically to PS emulation when a print
job requires it, regardless of the default printer language.
Note:
If PS SmartSwitch is off, then the printer does not examine
incoming data and uses the default printer language specified in
the Setup menu.
Mac Binary PS
Auto*
On
Off
Set the printer to process Macintosh binary PostScript print jobs.
Notes:
•
On processes raw binary PostScript print jobs.
•
Off filters print jobs using the standard protocol.
Ethernet
Menu item
Description
Network Speed
Show the speed of an active network adapter.
IPv4
Enable DHCP
On*
Off
Enable Dynamic Host Configuration Protocol (DHCP).
Note:
DHCP is a standard protocol that allows a server to distribute IP
addressing and configuration information to clients in a dynamic manner.
IPv4
Set Static IP Address
IP Address
Netmask
Gateway
Set the static IP address of your printer.
IPv6
Enable IPv6
On*
Off
Enable IPv6 in the printer.
IPv6
Enable DHCPv6
Off*
On
Enable DHCPv6 in the printer.
Note:
An asterisk (*) next to a value indicates the factory default setting.
Use printer menus
48
