Sharp MX-B427PW User Manual Download Page 114

Page: 114 / 131

Solid black pages

Note:

Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings

Troubleshooting

Print Quality Test Pages

. For non

‑

touch

‑

screen printer models, press

navigate through the settings.

Action

Yes

Check if the printer is using a genuine and supported toner
cartridge.

Note:

If the toner cartridge is not supported, then install a

supported one.

Print the document.

Is the printer printing solid black pages?

Contact your

dealer

. The problem is

solved.

Text or images cut off

Note:

Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings

Troubleshooting

Print Quality Test Pages

. For non

‑

touch

‑

screen printer models, press

navigate through the settings.

Action

Yes

Check if the printer is using a genuine and supported toner
cartridge.

Note:

If the toner cartridge is not supported, then install a

supported one.

Print the document.

Are text or images cut off?

Contact your

dealer

. The problem is

solved.

Troubleshoot a problem

114

Summary of Contents for MX-B427PW




































































































































Search results

Summary of Contents for MX-B427PW

Reviews:

Related manuals for MX-B427PW

Brands by name

Popular brands

Sharp MX-B427PW, User Manual

Search results

Summary of Contents for MX-B427PW

Reviews:

Related manuals for MX-B427PW

Brands by name

Popular brands