Sharp MX-B427PW User Manual Download Page 106

Page: 106 / 131

Action

Yes

Step 5

Replace textured paper with plain paper.

Print the document.

Is the print dark?

Go to step 6.

The problem is
solved.

Step 6

Load paper from a fresh package.

Note:

Paper absorbs moisture due to high humidity. Store

paper in its original wrapper until you are ready to use it.

Print the document.

Is the print dark?

Contact your

dealer

. The problem is

solved.

Fine lines are not printed correctly

Note:

Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings

Troubleshooting

Print Quality Test Pages

. For non

‑

touch

‑

screen printer models, press

navigate through the settings.

Action

Yes

Step 1

Check if the printer is using a genuine and supported toner
cartridge.

Note:

If the cartridge is not supported, then install a

supported one.

Print the document.

Are ﬁne lines not printed correctly?

Go to step 2.

The problem is
solved.

Step 2

Increase toner darkness.

From the control panel, navigate to:

Settings

Print

Quality

Toner Darkness

Print the document.

Are ﬁne lines not printed correctly?

Contact your

dealer

. The problem is

solved.

Troubleshoot a problem

106

Summary of Contents for MX-B427PW




































































































































Search results

Summary of Contents for MX-B427PW

Reviews:

Related manuals for MX-B427PW

Brands by name

Popular brands

Sharp MX-B427PW, User Manual

Search results

Summary of Contents for MX-B427PW

Reviews:

Related manuals for MX-B427PW

Brands by name

Popular brands