Sharp MX-B400P Operation Manual Download

Page: 83 / 249

2-4

BASIC PRINTING PROCEDURE

The following example explains how to print a document from "WordPad", which is a standard accessory program in
Windows.

PRINTING FROM WINDOWS

Select [Print] from the [File] menu of
WordPad.

If you are using Windows 7, click the

button.

The menu used to execute printing may vary depending on the software application.

Open the printer driver properties
window.

(1) Select the printer driver of the machine.

• If the printer drivers appear as icons, click the icon

of the printer driver to be used.

• If the printer drivers appear as a list, select the

name of the printer driver to be used from the list.

(2) Click the [Preferences] button.

• If you are using Windows 2000, the [Preferences]

button does not appear. Click a tab on the "Print"
dialog box to adjust the settings on that tab.

• In Windows 98/Me/NT 4.0, click the [Properties]

button.

The button that is used to open the printer driver properties window (usually [Properties] or [Printing Preferences])
may vary depending on the software application.

(1)

(2)

Summary of Contents for MX-B400P


























































































































































































































































Search results

Summary of Contents for MX-B400P

Reviews:

Related manuals for MX-B400P

Brands by name

Popular brands

Sharp MX-B400P, Operation Manual

Search results

Summary of Contents for MX-B400P

Reviews:

Related manuals for MX-B400P

Brands by name

Popular brands