Sharp MX-B380P Operation Manual Download Page 76

Page: 76 / 249

1-73

CLEANING THE PT CHARGER

If black or white lines still remain after the main charger have been cleaned, use the PT charger cleaner to clean the PT
charger.

Press the [POWER] key (

) on the

operation panel to turn off the panel
power, and then switch the main power
switch to the off position.

Open the front cover and remove the
toner collection container.

☞

REPLACING THE TONER COLLECTION
CONTAINER

(page 1-52)

Do not point the holes down as used toner will spill out.

Clean the PT charger.

(1) Slowly pull the PT charger cleaner out until

you feel a slight resistance.

(2) Slowly push the PT charger cleaner back in.

(3) Repeat the above (1) to (2) three times.

Install the toner collection container.

☞

REPLACING THE TONER COLLECTION
CONTAINER

(page 1-52)

(1)

(2)

Summary of Contents for MX-B380P


























































































































































































































































Search results

Summary of Contents for MX-B380P

Reviews:

Sharp MX-B380P, Operation Manual, Page: 76 / 249

Search results

Summary of Contents for MX-B380P

Reviews: