Sharp MX-B350W User Manual Download Page 64 | Manualshive

Page: 64 / 306

Sharp MX-B350W User Manual Download Page 64

2-21

SPECIAL MODES

COPYING BOTH SIDES OF A CARD AS A
SINGLE PAGE (CARD SHOT)

This function copies the front and reverse sides of a card on one sheet, not on separate sheets.
This function is convenient for making copies for identification purposes and helps save paper.

1

Press the [SPECIAL FUNCTION] key, select "Special Modes" with the [ ][ ]
keys, and press the [OK] key.

2

Select "Card Shot" with the [ ] [ ] keys and press the [OK] key.

3

Specify the card size in the Card Shot screen.

Select horizontal (X) or vertical (Y) with the [

][

] keys, specify the dimension with the

[

][

] keys, and press the [OK] key. Repeat for the other dimension.

• The horizontal and vertical dimensions can each be set to value from 1 to 8-1/2".
• Paper cannot be fed from the bypass tray.
• The card shot function cannot be used in combination with 2-Up / 4-Up copy, and ID card copy.
• The default settings for the horizontal and vertical dimensions in this screen can be set in

Card Shot Default (page 7-17)

the system settings.

Back

Front

Example of a portrait copy

Example of a landscape copy

«
...
62
63
64
65
66
...
»

Summary of Contents for MX-B350W



















































































































































































































































































































Reviews:

No comments