manualshive.com logo in svg

Sharp MX-B350W, User Manual

The Sharp MX-B350W is a versatile multifunctional printer designed for small office environments. With its user-friendly interface and advanced features, this product offers outstanding performance. Discover its full potential by downloading the free user manual from our website, manualshive.com, to easily access all the necessary information and instructions.

Share
Download
background image

7-14

SYSTEM SETTINGS

►

SYSTEM SETTINGS

Operation Setting

These settings are used to configure various settings 
related to the operation panel. To access one of these 
programs, select "Operation Setting" in the mode 
selection screen, select the desired setting in the 
operation setting screen, and press the [OK] key.

Auto Clear

This function returns the copy settings to the default 
settings if the operation panel is not used for the duration 
of time set with this setting following the end of a copy 
job. Time selections are "0 sec.", "10 sec.", "20 sec.", "60 
sec.", "90 sec." and "120 sec.".
The factory default setting is 60 seconds.

Select the desired time with the [

] or [

] key.

If you do not want auto clear to operate, select "0".

Disable Display Timeout

This setting is used to select whether or not the display 
will automatically return to the base screen if no keys are 
pressed on the operation panel for the time set in the 
above "Auto Clear" function setting in scan or fax mode.
The factory default setting is automatic return to the 
base screen.

Language Setting

This setting is used to select the display language.

Message Time

This setting is used to set the length of time that 
messages appear in the display (this applies to 
messages that appear for a certain length of time and 
then automatically disappear.) 
Select from "Short (3 sec.)", "Normal (6 sec.)", or "Long 
(9 sec.)".
The factory default setting is "Normal (6 sec.)".

Key Touch Sound

This setting is used to set the length of the key touch 
sound that is heard each time a key is pressed.
The initial factory setting is "Short".
Select the desired length with the [ ] or [ ] key.
To turn the key touch sound off, select "Off".

Keys Touch Sound At Initial Point

This setting is used to select whether or not a beep will 
sound at preset base settings as you press a key to 
select a setting.
The factory default setting is no beep.

Key Press Time

This setting is used to set the duration of time that a key 
must be pressed to take effect.
A longer setting can be selected to prevent keys pressed 
accidentally from taking effect. Keep in mind, however, 
that when a longer setting is selected more care is 
required when pressing keys to ensure that the key input 
is registered.
The initial factory setting is "Minimum".

Disable Auto Key Repeat

This setting is used to stop a setting from changing 
continuously when the [ ] or [ ] key is held down, such 
as when setting the zoom ratio or the original size (auto 
key repeat will not operate). When this setting is 
enabled, a key must be pressed repeatedly instead of 
holding it down.
Auto key repeat is initially set to operate (factory default 
setting).

Disable Paper Size Set

This setting is used to disable "Paper Size Set" in the 
Special Modes menu. When disabled, "Paper Size Set" 
cannot be used when the [Special Function] key is 
pressed, which prevents users other than the 
administrator from easily changing the paper size 
setting.
"Disable Paper Size Set" is initially disabled (factory 
default setting).

The Auto Clear function is disabled when scanned 
data is stored under the following status: When the 
last page has not been scanned during the 2-Up or 
4-Up copy process (one page has been scanned for a 
two-page set or three pages have been scanned in a 
four-page set), or only one side has been scanned in 
the ID card copy process.

Summary of Contents for MX-B350W



















































































































































































































































































































Reviews:

No comments

Related manuals for MX-B350W

Canon FaxPhone L120 Starter Manual preview
FaxPhone L120
Brand: Canon Pages: 11
Canon imageRUNNER ADVANCE 8085 Maintenance Manual preview
imageRUNNER ADVANCE 8085
Brand: Canon Pages: 176
Canon FaxPhone L120 Software Manual preview
FaxPhone L120
Brand: Canon Pages: 85
Canon imageRUNNER 5070 Specification preview
imageRUNNER 5070
Brand: Canon Pages: 4
Canon imageRUNNER 5570 Specification preview
imageRUNNER 5570
Brand: Canon Pages: 4
Canon IMAGERUNNER 7095 PRINTER Brochure & Specs preview
IMAGERUNNER 7095 PRINTER
Brand: Canon Pages: 8
Canon IMAGERUNNER 7105 Service Manual preview
IMAGERUNNER 7105
Brand: Canon Pages: 21
Canon FaxPhone L120 Advanced Manual preview
FaxPhone L120
Brand: Canon Pages: 58
Canon IMAGERUNNER ADVANCE C5051 Manual preview
IMAGERUNNER ADVANCE C5051
Brand: Canon Pages: 12
Canon imageRUNNER ADVANCE C2020 Setup Manual preview
imageRUNNER ADVANCE C2020
Brand: Canon Pages: 68
Canon imageRUNNER ADVANCE 6055 Maintenance Manual preview
imageRUNNER ADVANCE 6055
Brand: Canon Pages: 134
Canon Color imageRUNNER LBP5970 Getting Started Manual preview
Color imageRUNNER LBP5970
Brand: Canon Pages: 67
Canon FAXPHONE L170 - B/W Laser - Copier Starter Manual preview
FAXPHONE L170 - B/W Laser - Copier
Brand: Canon Pages: 12
Canon FAXPHONE L100 Technical Information preview
FAXPHONE L100
Brand: Canon Pages: 2
Canon imageRunner 1133 Starter Manual preview
imageRunner 1133
Brand: Canon Pages: 60
Canon Color imageCLASS MF8280Cw Getting Started Manual preview
Color imageCLASS MF8280Cw
Brand: Canon Pages: 36
Canon FAX-L380 Software Manual preview
FAX-L380
Brand: Canon Pages: 104
Canon imagePROGRAF iPF8300 Setup Manual preview
imagePROGRAF iPF8300
Brand: Canon Pages: 16

Brands by name

Popular brands

Load more brands