manualshive.com logo in svg

Sharp MX-B350W, User Manual, Page: 169 / 306

Share
Download
Sharp MX-B350W User Manual Download Page 169

4-44

FACSIMILE

►

CONVENIENT FAX FUNCTIONS

Editing programs

If you need to edit a previously stored program, follow these steps.

Deleting programs

Before deleting a program, print the "Program List" to check the contents. 

(

►

page 4-45)

 

To delete a previously stored program, follow these steps.

3

Select the program that you wish to edit with the [ ] or [ ] key.

4

Edit the program name (see 

CHARACTER ENTRY (page 1-39)

).

• See step 3 of 

Storing a program (page 4-43)

.

• If you do not wish to edit the program name, go to the next step.

5

Select the stored setting that you wish to edit with the [ ] or [ ] key.

• See steps 4 of 

Storing a program (page 4-43)

.

• If you do not wish to edit the stored settings, press the [START] key and then press the [BACK] key to exit.

3

Select the program that you wish to delete with the [ ] or [ ] key.

4

Select "Delete" with the [ ] or [ ] key.

Summary of Contents for MX-B350W



















































































































































































































































































































Reviews:

No comments