manualshive.com logo in svg

Sharp MX-7090N, User Manual

Share
Download
Sharp MX-7090N User Manual Download Page 748

7-151

SYSTEM SETTINGS

►

SYSTEM SETTINGS

Manual

You can set a pattern for each time band.
The machine already has the 3-pattern template. The Energy Save pattern can be added to the "Original Eco Patterns 1 
to 4". 

Three-pattern template

Sleep Mode Power Level

Low Power:

The machine switches to the power saving mode, but it takes some time to recover.

Fast Wake Up:

Compared with Low Power, the power value rises by a certain degree, but it results in faster recovery.

Template

Pattern

Description of mode

Template 1

All Day "Energy Save 
Priority2"

The machine runs in the "Mode4 (Energy Saving Priority2)" all the 
time.

Template 2

8:00-18:00 "Energy Save 
Priority1"

The machine runs in "Mode3 (Energy Saving Priority1)" between 8:00 
and 18:00, and in "Mode4 (Energy Saving Priority2)" at other times.

Template 3

8:00-18:00 "Job Start 
Priority1"

The machine runs in "Mode1 (Job Start Priority1)" between 8:00 and 
18:00, and in "Mode4 (Energy Saving Priority2)" at other times.

Summary of Contents for MX-7090N






















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands