Sharp MX-7090N, User Manual

Page: 703 / 789

7-106
SYSTEM SETTINGS ► SYSTEM SETTINGS
Select Paper Sizes for Auto Detection
"Select Paper Sizes for Auto Detection" in the bypass tray settings screen is used to select the paper size that is
automatically detected from similar sizes when the automatic paper size detection takes place.
Select one of two sizes when "Auto-Inch" is set. Select one of five sizes when "Auto-AB" is set.
When paper that is the same size as one of the paper sizes in the settings is placed in the bypass tray, the size that is
selected in the settings will be automatically detected.
* This size cannot be set for some trays.
Custom Size Registration (Bypass)
Bypass tray and paper type settings are explained in this section.
If you frequently use a non-standard size paper in the bypass tray, register that paper size in advance.
Registering the paper size saves you the trouble of setting the size each time you need to use it.
Up to Seven paper sizes can be registered.
Tap the key ([Custom 1] to [Custom 7]) in which you wish to register or change a paper size, and the registration screen
appears.
Select whether you wish to enter the size in mm ("Size Input-AB") or inches ("Size Input-Inch"), and then set the X and Y
dimensions of the paper.
"Size Input-AB"
The X direction can be set between 140mm and 457mm. The factory default setting is 420mm.
The Y direction can be set between 90mm and 320mm. The factory default setting is 297mm.
"Size Input-Inch"
The X direction can be set between 5-1/2" and 18". The factory default setting is 17".
The Y direction can be set between 3-5/8" and 12-1/2". The factory default setting is 11".
Paper Settings
When [Add] is tapped in Paper Settings selection in the paper tray settings, the Paper Settings registration screen
appears. By selecting advanced settings in Paper Properties for the paper to be used, you can print using the most
suitable conditions for the printed mater.
A maximum of 1000 properties can be registered.
List name Description
Auto-Inch
8-1/2" x 14", 8-1/2" x 13-2/5" (216 mm x 340 mm), 8-1/2" x 13-1/2" (216 mm x 343 mm),
8-1/2" x 11"R
*
Auto-AB
8-1/2" x 13" (216 mm x 330 mm), 8-1/2" x 13-2/5" (216 mm x 340 mm), 8-1/2" x 13-1/2"
(216 mm x 343 mm), A4R
*
The Paper Settings can also be set from Tray Settings/Paper Settings in the Home screen. Select User Type for the paper
type selection, and tap "Add/Edit Paper Settings" in the action panel.
10:15 AM
Job Management
Toner Quantity
M
C
Bk
Y
Tray Settings/
Paper Settings
Scan to HDD Batch Print Sharp OSA
Manual
Finishing
HDD
File retrieve
Operation
Guide
PC Scan Total Count Machine
Adjustment
LCD Control
Settings
Copy
Y
Operation
Guide
PC Scan Total Count Machine
Adjustment
LCD Control
Settings
Add/Edit Paper Settings
Add Paper Property
Edit Home
MFP Display Pattern
Settings
Change Text Color
On Home Screen
Tray Settings
Feeding
Approved Job
Glossy Paper User Type 1
User Type 2 User Type 3 User Type 4
User Type 5 User Type 6 User Type 7
User Type 8
User Type 11
User Type 9 User Type 10
Embossed
Type: User Type 1
Please Select Paper Type.
Size: Auto-Inch
Paper Property Bypass
Tray Settings
Feeding
Approved Job
Glossy Paper User Type 1
User Type 2 User Type 3 User Type 4
User Type 5 User Type 6 User Type 7
User Type 8
User Type 11
User Type 9 User Type 10
Embossed
Type: User Type 1
Please Select Paper Type.
Size: Auto-Inch
Paper Property Bypass