Sharp MX-7090N User Manual Download Page 301

Page: 301 / 789

2-141

COPIER

►

OTHER FUNCTIONS

ADJUSTING THE INTENSITY OF A COPY (INTENSITY)

This function adjusts the intensity (saturation) of a color copy image.

You must set the intensity before scanning the original.

This function cannot be combined with [Copy of Copy] or [Color Tone Enhancement] in Exposure.

Tap the [Others] key, and tap the [Intensity] key.

Tap

the key or slide the slider to

adjust the intensity.

After the settings are completed, tap

twice.

To cancel the Intensity setting:

Tap the [Off] key.

Place the original.

Place the original in the document feeder tray of the automatic document feeder, or on the document glass.

►

AUTOMATIC DOCUMENT FEEDER (page 1-90)

►

DOCUMENT GLASS (page 1-92)

To cancel all settings:

Tap the [CA] key.

Tap the [Color Start] key to start copying.

Weakening the intensity

Originals

Strengthening the intensity

8½x11 8½x11

8½x14
11x17

Proof Copy

Others

Preview

Start

Back

Intensity
This setting is only applied to colour.

Color Mode

Exposure

Select Type/Exposure

Off

Darker

-2

-1

Change Size/Direction.

Original

Lighter

Adjust Thickness of RGB

RGB

Adjust Brightness

Brightness

B/W

Color

Summary of Contents for MX-7090N






















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-7090N

Reviews:

Related manuals for MX-7090N

Brands by name

Popular brands

Sharp MX-7090N, User Manual

Search results

Summary of Contents for MX-7090N

Reviews:

Related manuals for MX-7090N

Brands by name

Popular brands