Sharp MX-7090N User Manual Download Page 300

Page: 300 / 789

2-140

COPIER

►

OTHER FUNCTIONS

ADJUSTING THE BRIGHTNESS OF A COPY

(BRIGHTNESS)

This function adjusts the brightness of a color copy image.

Brightness must be specified before scanning the original.

Tap the [Others] key, and tap the [Brightness] key.

Tap the

key or slide the slider to

adjust the brightness.

After the settings are completed, tap

twice.

To cancel the brightness setting:

Tap the [Off] key.

Place the original.

Place the original in the document feeder tray of the automatic document feeder, or on the document glass.

►

AUTOMATIC DOCUMENT FEEDER (page 1-90)

►

DOCUMENT GLASS (page 1-92)

To cancel all settings:

Tap the [CA] key.

Tap the [Color Start] key to start copying.

Dark

Originals

Light

8½x11

8½x14
11x17

Proof Copy

Others

Preview

Start

Back

Brightness
This setting is only applied to colour.

Color Mode

Exposure

Select Type/Exposure

Off

Light

-2

-1

Change Size/Direction.

Original

Dark

Adjust Outline of Image

Sharpness

Intensity

Adjust Intensity

B/W

Color

Summary of Contents for MX-7090N






















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-7090N

Reviews:

Related manuals for MX-7090N

Brands by name

Popular brands

Sharp MX-7090N, User Manual

Search results

Summary of Contents for MX-7090N

Reviews:

Related manuals for MX-7090N

Brands by name

Popular brands