Sharp MX-6201N Series, User Manual

Page: 694 / 710

91
Initialize and/or Store Settings
The current system settings can be stored, previously stored system settings can be retrieved, and the factory default
system settings can be restored. Touch the [Initialize and/or Store Settings] key to configure the settings.
Restore Factory Defaults
This is used to return the system settings to the factory
default settings. If you wish to create a record of the
current settings before restoring the factory default
settings, print the current settings using "
List Print
(Administrator) " (page 85) in the system settings
(administrator).
Store Current Configuration
This is used to store the currently configured system
settings. The stored settings will be retained even if the
[POWER] key (
) is turned off. To retrieve the stored
settings, use " Restore Configuration " below.
Items not stored
• Network Settings: These are not stored as unexpected
settings may cause damage to the
network.
• Product Keys: Product Keys are not stored as
reissue of keys may be necessary.
Restore Configuration
Use this to restore settings stored with " Store Current
Configuration ".
The current settings will change to the retrieved settings.
After executing the reset, exit the system settings, turn
off the [POWER] key (
), wait a brief interval, and
then turn the [POWER] key ( ) back on to make
the factory default settings take effect.