Sharp MX-6201N Series, User Manual

Page: 598 / 710

44
3
Using the user name to search
There are four ways to select the user name:
(A) Touch the key of the user name.
The touched user name is highlighted.
If you accidentally select the wrong user name, touch the
key of the correct name.
(B) Touch the [Default User] key.
The user name can be selected from the factory stored
users.
(C) Touch the key.
An area for entering the "Registration No." [---] appears in
the message display. Enter the "Registration No." set
during user registration. This will allow you to select the
user name.
(D) Touch the [Direct Entry] key.
A text entry screen appears. Directly enter the user name.
To enter text, see "6. ENTERING TEXT" in the User's
Guide. Searching is possible even if you only enter the first
several letters of the user name.
After selecting the user name, touch the [OK] key.
After the user name is selected, the [Password] key can be
touched. To search for files of the selected user name that
have a certain password, touch the [Password] key and enter
the password.
(It is not possible to search using a password only.)
Using the file name or folder name to
search
Enter the file name or folder name in the text entry screen that
appears and touch the [OK] key.
User Name
OK Cancel
6 18 12
ABC
User
Name 3
Name 1
Name 5
Name 7
Name 9
Name 11
Name 2
Name 4
Name 6
Name 8
Name 10
Name 12
1
2
All Users ABCD EFGHI JKLMN OPQRST UVWXYZ
Default User
Direct Entry
(A) (B)(D) (C)