Sharp MX 5500N - Color Laser - Copier, User Manual, Page: 69 / 576

Share

Page: 69 / 576

Sharp MX 5500N - Color Laser - Copier User Manual Download Page 69

68

Color Adjustments

The following color settings can be configured.

Initial Color Balance Setting

Color balance values obtained using "Color Balance" in
the special modes can be stored in a program (1 to 48),
and those values can be retrieved and stored as the
initial color balance setting*. Use this feature when you
want to repeatedly use a color balance setting for a
favorite color or for correction when a change occurs in
the color balance.
* Preset values displayed when you select "Color

Balance" in the special modes.

Return to the Factory Default Setting

This returns the stored color balance values to the
factory default values (all color balance values are "0" for
the 8 levels of each color).

Auto Color Calibration

This is used to perform automatic color correction when
the color in color copies is off. The machine prints a test
patch, the test patch is scanned, and the color is
automatically corrected.
After the [Execute] key is touched and a test patch is
printed, a message appears prompting you to begin
automatic calibration. Place the test patch on the
document glass as shown below (so that the thin line at
the edge of the page is to the left).

Lay copy paper (about five sheets) that is the same size
as the test patch on top of the placed test patch, gently
close the automatic document feeder, and touch the
[Execute] key.

• Before executing Auto Color Calibration, check to

see if the registration adjustment is correct. If the
registration adjustment is not correct, perform
"

Registration Adjustment

" (page 62).

• If the color is still off after performing Auto Color

Calibration, repeating Auto Color Calibration once
again may improve the color.

Thin line

«
...
67
68
69
70
71
...
»

Summary of Contents for MX 5500N - Color Laser - Copier

































































































































































































































































































































































































































































































































































































Reviews:

No comments