manualshive.com logo in svg

Sharp MX 5500N - Color Laser - Copier, User Manual, Page: 68 / 576

Share
Download
Sharp MX 5500N - Color Laser - Copier User Manual Download Page 68

67

Disabling Deletion of Job Programs

This is used to prohibit the deletion and changing of copy 
settings stored in job programs.

Disabling of Bypass-Tray in 
Duplex Copy

This is used to prohibit the use of the bypass tray when 
making two-sided copies.
The bypass tray is often used to feed label sheets, 
transparency film, and other special media for which 
two-sided copying is prohibited. If a sheet of one of these 
special media enters the reversing unit, a misfeed or 
damage to the unit may result. If special media for which 
two-sided copying is prohibited is often used, it is 
recommended that you enable this setting.

Disabling of Auto Paper Selection

This setting is used to disable the Auto Paper Selection 
function.
When this setting is enabled, automatic selection of 
paper that is the same size as the original on the 
document glass or in the automatic document feeder 
does not take place.

Auto Selection Setting of Tray that 
is Supplied the Paper

When this setting is enabled and paper is loaded in a 
tray while the machine is on standby in copy mode, that 
tray is automatically selected.

B/W 600dpi x 600dpi Scanning 
Mode for Document Feeder

The resolution for copying in black and white using the 
automatic document feeder can be changed from 600 x 
300 dpi to 600 x 600 dpi (high quality mode).
When high quality mode is used, fine print and thin lines 
are reproduced with greater clarity, however, the 
scanning speed is slower.

B/W Quick Scan from Document 
Glass

The resolution for copying in black and white using the 
document glass can be changed from 600 x 600 dpi to 
600 x 300 dpi (high speed mode).
When high speed mode is selected, the first copy time is 
quicker, however, the copy image is not as clear.

When high quality mode is not selected, the following 
conditions must be satisfied in order to scan at 600 x 
300 dpi and attain the fastest speed.

• The copy ratio must be set to 100%.

• Do not select a special mode that will change the 

ratio.

• [Copy of Copy] must not be enabled.

• Do not copy in black and white with the [COLOR 

START] key (

).

When high speed mode is selected, the following 
conditions must be satisfied in order to scan at 600 x 
300 dpi and attain the fastest speed.

• The copy ratio must be set to 100%.

• Do not select a special mode that will change the 

ratio.

• [Copy of Copy] must not be enabled.

• Do not copy in black and white with the [COLOR 

START] key (

).

Summary of Contents for MX 5500N - Color Laser - Copier

































































































































































































































































































































































































































































































































































































Reviews:

No comments