manualshive.com logo in svg

Sharp MX 5500N - Color Laser - Copier, User Manual, Page: 549 / 576

Share
Download
Sharp MX 5500N - Color Laser - Copier User Manual Download Page 549

51

FINISHER / SADDLE STITCH FINISHER MAINTENANCE

When the staple cartridge runs out of staples, a message will appear in the operation panel. Follow the procedure below 
to replace the staple cartridge.

Replacing the cartridge in the finisher

1

Open the front cover.

2

Squeeze the green parts of the staple 
case and pull the case up and then out.

3

Remove the empty staple cartridge.

Press the lock button to release the staple case cover and then 
remove the staple cartridge.

When staples remain, the staple cartridge cannot be removed.

4

Insert a new staple cartridge into the 
staple case.

Push the staple cartridge in until it clicks into place.

Do not remove the seal from the cartridge before inserting the cartridge into the case.

Summary of Contents for MX 5500N - Color Laser - Copier

































































































































































































































































































































































































































































































































































































Reviews:

No comments