Sharp MX 5500N - Color Laser - Copier User Manual Download Page 507

Page: 507 / 576

SIDE AND BACK

(1)

USB connector (A type)

This is used to connect a USB device such as USB
memory to the machine.
For the USB cable, use a shielded cable.

(2)

USB connector (B type )

A computer can be connected to this connector to use
the machine as a printer.
For the USB cable, use a shielded cable.

(3)

LAN connector

Connect the LAN cable to this connector when the
machine is used on a network.
For the LAN cable, use a shielded type cable.

(4)

Service-only connector

(5)

Power plug

(1)

(2)

(3)

(4)

(5)

Caution

This connector is for use only by service technicians.
Connecting a cable to this connector may cause the
machine to malfunction.

Important note for service technicians:
The cable connected to the service connector must be
less than 118" (3 m) in length.

Summary of Contents for MX 5500N - Color Laser - Copier

































































































































































































































































































































































































































































































































































































Sharp MX 5500N - Color Laser - Copier, User Manual, Page: 507 / 576

Search results

Summary of Contents for MX 5500N - Color Laser - Copier

Reviews: