Sharp MX 5500N - Color Laser - Copier User Manual Download Page 400

Page: 400 / 576

ERASING PERIPHERAL SHADOWS (Erase)

The erase function is used to erase shadows around the edges of copies that occur when copying thick originals or
books.

When a thick book is copied

Erase modes

Shadows appear here

Not using the erase

function

Using the erase

function

Shadows appear on the
copy.

Shadows do not appear on
the copy.

Place the original.

Place the original face up in the document feeder tray, or face down on the document glass.

Select the special modes.

(1) Touch the [Special Modes] key.

(2) Touch the [Erase] key.

☞

Special modes menu (1st screen)

(page 44)

Select the erase settings.

(1) Touch the desired erase mode.

Select one of the three positions.

(2) Set the erasure width with

0" to 1" (0 mm to 20 mm) can be entered.

(3) Touch the [OK] key.

You will return to the base screen of copy mode.

Edge Erase

Center Erase

Edge + Center Erase

Special Modes

Erase

Edge

Erase

Edge

(0~1)
inc

Center

(0~1)
inc

Cancel

Center

Erase

Edge

Center

Erase

(2)

(3)

(1)

Summary of Contents for MX 5500N - Color Laser - Copier

































































































































































































































































































































































































































































































































































































Sharp MX 5500N - Color Laser - Copier, User Manual, Page: 400 / 576

Search results

Summary of Contents for MX 5500N - Color Laser - Copier

Reviews: