Sharp MX 5500N - Color Laser - Copier, User Manual, Page: 254 / 576

Share

Page: 254 / 576

Sharp MX 5500N - Color Laser - Copier User Manual Download Page 254

97

CHANGING THE PRINT SETTINGS FOR THE
TRANSACTION REPORT (Transaction
Report)

A transaction report is automatically printed out to alert you when an Internet fax transmission fails or when a broadcast
transmission is performed. The transaction report contains a description of the transmission (date, start time, name of
other party, time required, number of pages, result, etc.).

☞

INFORMATION APPEARING IN THE RESULT COLUMN

Transaction reports are printed based on conditions set in the system settings; however, you can temporarily select
different conditions for a transmission. To change the transaction report print conditions at the time of transmission,
follow the steps below.

This function cannot be used in scan mode, USB memory mode, or data entry mode.

1

Place the original.

Place the original face up in the document feeder tray, or face down on the document glass.

2

Select the special modes.

(1) Touch the [Internet Fax] tab.

(2) Touch the [Special Modes] key.

(3) Touch the

keys to switch through the screens.

(4) Touch the [Transaction Report] key.

☞

3

Select print conditions.

(1) Select the print conditions.

(2) Touch the [OK] key.

When the [Print Original Image] checkbox is selected

, part of the transmitted original is included on the

transaction report.

Internet Fax/Special Modes

OK

Transaction Report

Print Original Image

OK

Cancel

Always Print

Print at Error

Do not Print

(1)

(2)

«
...
252
253
254
255
256
...
»

Summary of Contents for MX 5500N - Color Laser - Copier

































































































































































































































































































































































































































































































































































































Reviews:

No comments