manualshive.com logo in svg

Sharp MX-4100N, Operation Manual, Page: 793 / 903

Share
Download
Sharp MX-4100N Operation Manual Download Page 793

8-10

TROUBLESHOOTING

Contents

FINISHER (LARGE STACKER)

1

Open the front cover.

2

Squeeze the green parts of the staple 
case and pull the case up and then out.

3

Lower the lever at the front end of the 
staple case and remove the jammed 
staple.

Remove the leading staple if it is bent. If bent staples remain, a 
staple jam will occur again.

Take care that a bent staple does not hurt you.

4

Return the lever to its original position.

Summary of Contents for MX-4100N








































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments