manualshive.com logo in svg

Sharp MX-3070N, User Manual

Share
Download
Sharp MX-3070N User Manual Download Page 601

5-110

SCANNER/INTERNET FAX

►

INTERNET FAX RECEPTION FUNCTIONS

PRINTING RECEIVED DATA AT A SPECIFIED TIME

Print received data at a specified time.
For stress-free printing, you should avoid printing large numbers of pages at peak times during the day, and when you 
do not urgently need to print.

• The printed data is automatically deleted from memory.
• If the power is turned off at the specified time, printing will start at the timing when the power is turned on.
• This function can be specified when the Received Data Image Check Setting is enabled.

 If Hold Setting for Received Data Print is enabled, this function cannot be used.

•

To print received data at the specified time:

In "Setting mode", select [System Settings] 

→

 [Image Send Settings] 

→

 [Common Settings] 

→

 [Condition Settings] 

→

 [Time Specified Output of Received Data].

•

To disable the hold setting for received data print:

In "Setting mode (administrator)", disable this function using [System Settings] 

→

 [Image Send Settings] 

→

 [Common Settings] 

→

 [Condition Settings] 

→

 [Hold Setting for Received Data Print].

During the day, configure the 
setting to print received data 
at 20:00.

At 20:00, printing starts 
automatically.

Print

Summary of Contents for MX-3070N




























































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands