Sharp MX 3070, Troubleshooting Manual

Page: 11 / 56

11
General Problems
PRINTING IS NOT POSSIBLE OR STOPS DURING
A JOB
Check Solution
Is a tray out of paper? ■ Add paper as instructed by the message in the touch panel.
Is the machine out of toner?
■
Replace the toner cartridge.
► Maintenance (page 6)
Has a paper misfeed occurred? ■ Remove the misfeed as instructed by the message in the touch panel.
Is the output tray full?
■
Remove the output from the tray and resume printing.
When the output tray becomes full, a detector activates and stops printing.
Is the toner collection container full? ■ Replace the toner collection container as instructed by the message in the touch
panel.
Are restrictions placed on the trays
that can be used in each mode(copy,
print, image send, and document
filing)?
■
Check the settings in [Paper Tray Settings] and see if checkmarks appear in the
checkboxes of each mode ([Feeding Approved Job]).
Functions without a checkmark cannot be used for printing using that tray.

"Setting mode" → [System Settings] → [Common Settings] → [Paper Settings]
→ [Tray Settings/ Paper Settings] → [Paper Tray Settings]
→ [Tray Registration] → [Feeding Approved Job]
I DON'T KNOW HOW TO PROHIBIT COLOR PRINTING
Check Solution
You can prohibit color printing in
User Control. ■ When user authentication is enabled, you can prohibit color printing for specific
users.

"Setting mode" → [User Control] → [User List].

"Setting mode" → [User Control] → [Machine Page Limit Setting].
For copy mode, you can set copying
to black & white priority. For printing
mode, you can set printing to black &
white priority in the printer driver
settings.
■
Although this does not prohibit color copies, you can set the color mode to black
& white priority as a means of reducing the number of color pages printed.
Copying

Set "Setting mode(administrator)" → [System Settings] → [Copy Settings] →
[Initial Status Settings] → [Color Mode] to [B/W]
Printing

Select [Grayscale] on the [Main] tab of the printer driver.
?
!
?
!