manualshive.com logo in svg

Sharp MX-2651, Quick Start Manual, Page: 12 / 64

Share
Download
Sharp MX-2651 Quick Start Manual Download Page 12

12

BEFORE USING THE MACHINE

PART NAMES AND FUNCTIONS

(1)

Job separator (upper tray)

*

Received faxes and printed papers are delivered to this tray.
You can also output jobs to the job separator (center tray) when 
a relay unit is installed.

(2)

Output tray

*

Output is delivered to this tray.

(3)

Automatic document feeder

It automatically feeds and scans multiple originals. 2-sided 
originals can be automatically scanned. For the 
MX-3071/MX-3571/MX-4071, both sides of 2-sided originals can 
be automatically scanned at one time.

►

USING THE AUTOMATIC DOCUMENT FEEDER (page 18)

(4)

USB port (A type)

This is used to connect a USB device such as a USB memory 
device to the machine.
Supports USB 2.0 (Hi-Speed).

(5)

Operation panel

This panel hosts the [Power] button, [Power Save] 
button/indicator, error indicator, [Home Screen] key, main power 
indicator, data notification indicator, communication indicator, 
and touch panel.
Use the touch panel to operate each of these functions.

►

OPERATION PANEL (page 15)

(6)

Exit tray unit (right tray)

*

Set so that paper is output into this tray as required.

(7)

Inner finisher

*

This staples paper. A punch module can also be installed to 
punch holes in output paper.
You can also perform stapling manually.

(8)

Finisher

*

This staples paper. A punch module can also be installed to 
punch holes in output paper.

(9)

Saddle Stitch Finisher

*

This staples and folds paper. A punch module can also be 
installed to punch holes in output paper.

(10) Finisher (large stacker)*

This staples paper. A punch module can also be installed to 
punch holes in output paper.
You can also perform stapling manually.

(11) Paper pass unit

*

Relay between the machine and the finisher or saddle stitch finisher.

(12) Saddle Stitch Finisher (large stacker)*

This staples and folds paper. A punch module can also be 
installed to punch holes in output paper.
You can also perform stapling manually.

(13) Tray 1

Store paper in this tray. A maximum of 550 sheets (80 g/m

2

 (20 

lbs.)) of paper can be loaded.

(14) Tray 2 (when a low stand/550 sheet paper drawer or 

stand/550/2x550/3x550/550&2100 sheet paper drawer is installed)

*

Store paper in this tray. A maximum of 550 sheets (80 g/m

2

 (20 

lbs.)) of paper can be loaded.

(15) Tray 3 (when a stand/2x550/3x550 sheet paper drawer is 

installed)

*

Store paper in this tray. A maximum of 550 sheets (80 g/m

2

 (20 

lbs.)) of paper can be loaded.

(16) Tray 4 (when a stand/3x550 sheet paper drawer is installed)

*

Store paper in this tray. A maximum of 550 sheets (80 g/m

2

 (20 

lbs.)) of paper can be loaded.

(17) Tray 3 (when a stand/550&2100 sheet paper drawer is 

installed)

*

Store paper in this tray. A maximum of 1200 sheets (80 g/m

2

 (20 

lbs.)) of paper can be loaded.

(18) Tray 4 (when a stand/550&2100 sheet paper drawer is 

installed)

*

Store paper in this tray. A maximum of 900 sheets (80 g/m

2

 (20 

lbs.)) of paper can be loaded.

(19) Tray 5 (when a large capacity tray is installed)*

Store paper in this tray. A maximum of 3000 sheets (80 g/m

2

 (20 

lbs.)) of paper can be loaded.

(20) Front cover

Open this cover to switch the main power switch to "On" or "Off" 
to replace a toner cartridge.

* Peripheral device. For more information, see the User's Manual.

(2)

(3)

(3)

(4)

(5)

(12)

(11)

(10)

(9)

(8)

(13)(14) (15)(16)

(17)

(1)

(18) (19) (20)

(6)

(7)

MX-2651/MX-3051/

MX-3551/MX-4051

Summary of Contents for MX-2651

































































Reviews:

No comments