5-135
SCANNER/INTERNET FAX►INTERNET FAX RECEPTION FUNCTIONS
PRINTING RECEIVED DATA AT A SPECIFIED TIME
Print received data at a specified time.
For stress-free printing, you should avoid printing large numbers of pages at peak times during the day, and when you
do not urgently need to print.
• The printed data is automatically deleted from memory.
• If the power is turned off at the specified time, printing will start at the timing when the power is turned on.
• This function can be specified when the Received Data Image Check Setting is enabled.
If Hold Setting for Received Data Print is enabled, this function cannot be used.
•
To print received data at the specified time:
In "Settings", select [System Settings] → [Image Send Settings] → [Common Settings] → [Condition Settings]
→ [Time Specified Output of Received Data].
•
To disable the hold setting for received data print:
In "Settings (administrator)", disable this function using [System Settings] → [Image Send Settings] → [Common Settings] →
[Condition Settings] → [Hold Setting for Received Data Print].
During the day, configure the
setting to print received data
at 20:00.
At 20:00, printing starts
automatically.