manualshive.com logo in svg

Sharp MX-2630N, User Manual, Page: 202 / 944

Share
Download
Sharp MX-2630N User Manual Download Page 202

2-36

COPIER►BASIC PROCEDURE FOR MAKING COPIES

STORING FREQUENTLY USED ORIGINAL 
SIZES

Store the frequently used non-standard original sizes. This section explains how to store, retrieve, change, and delete 
non-standard original sizes.

Storing original sizes (Amend/Delete)

• The stored original size will be retained even if the main power is turned off.
• A total of up to 12 non-standard original sizes can be registered for copying, fax, and image sending.
• The added original sizes will also appear in other modes.

1

Tap the [Detail] key to change to normal mode.

► Changing mode from each mode (page 2-5)

2

Tap the [Original] key.

3

Tap the [Custom Size] tab.

4

Tap [Store/Delete Original Size] on the 
action panel.

Preview

Start

Original

Others

Auto

Direct Entry

Inch

AB

Custom Size

Image Orientation

No. of copies

Skip Blank Page in Original

Copy Ratio

Enlarge/Reduce Copy

Blank Page Skip

Background Adjustment

2-Sided Copy

Colour Mode

Store/Delete
Original Size

Colour
Start

A4

1

CA

B/W

Summary of Contents for MX-2630N

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments