Sharp MX-2610N User Manual Download Page 651

Page: 651 / 1312

OPERATION GUIDE - DELETING A DOCUMENT FROM THE PUBLIC BOX

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/04-083b.htm[24/03/2011 3:00:56 PM]

MX-2610N / MX-3110N / MX-3610N

DELETING A DOCUMENT FROM THE PUBLIC BOX

Index

Contents

Overview

FAX

steps in all >

Tap the [Others >>] key, and tap the [Memory Box] key.

Tap the [Polling Memory] tab.

Tap the [Public Box] key from the folder list.

When nothing is stored in the Public Box, the [Public Box] key will be greyed out.

Tap the [Empty out Box] key.

Tap the [Delete] key.

The document is deleted and you return to the screen of step 2.

You can tap the [Image Check] key to check the image in the touch panel before

deleting it.

To cancel deleting the document:

Tap the [No] key.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 651 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: