OPERATION GUIDE - STORING FAX OPERATIONS
file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/04-062a.htm[24/03/2011 3:00:30 PM]
MX-2610N / MX-3110N / MX-3610N
STORING FAX OPERATIONS
Program
FAX
This function collectively stores various settings as one program. The stored program can be
retrieved using an easy operation.
For example, suppose that the same A4 (8-1/2" x 11") size documents are distributed to
branch offices in various regions once a month.
When a job program is not stored
When a job program is stored
Enter the fax number for each branch.
Specify 2in1.
Specify Erase.
Tap the [Start] key.
Scan and send the original.
Call the registered program.
Tap the [Start] key.
Scan and send the original.
Considerable time is required to send the
documents each month because the above
settings must be selected.
In addition, mistakes are occasionally made
when selecting the settings.
When a program is stored, settings are
selected with ease by simply tapping the key
of the program.
In addition, transmission takes place
according to the stored settings so there are
no chances for mistakes.
To configure a program:
The same documents are faxed to each branch office
(1)
To save paper, two document pages are faxed as a single page
(2)
Smudges on the edges of the documents are erased before
transmission
(3)