Sharp MX-2610N User Manual Download Page 523

Page: 523 / 1312

OPERATION GUIDE - RETRIEVING A DESTINATION NUMBER FROM A GLOBAL ADDRESS BOOK

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/04-021b.htm[24/03/2011 2:59:52 PM]

MX-2610N / MX-3110N / MX-3610N

RETRIEVING A DESTINATION NUMBER FROM A GLOBAL

ADDRESS BOOK

FAX

steps in all >

Tap [Search from] and tap

the LDAP server to be
used.

If an authentication screen for the

LDAP server appears, enter your user

name and password.

If only one LDAP server has been

stored, it is not necessary to take step

2. In this case, start from step 3.

After the settings are completed, tap

In the base screen or address book screen, tap the [Global

Address Search] key on the action panel.

Tap of [Item] to select the object to be searched, and tap

[Touch to Input Keyword] to enter the initial of destination,
then tap the [Start Search] key.

The search results will appear after a brief interval.

How to search

Enter the search characters (maximum of 64 characters). The system will look for

names starting with the entered letters.

An asterisk can be used as follows:

XXX : Names beginning with "XXX"

XXX: Names that end with "XXX"

XXX : Names containing "XXX"

AA XX: Names that start with "AA" and end with "XX".

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 523 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: