Sharp MX-2610N User Manual Download Page 183

Page: 183 / 1312

OPERATION GUIDE - AUTOMATIC RATIO SELECTION

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/02-013b.htm[24/03/2011 2:57:19 PM]

MX-2610N / MX-3110N / MX-3610N

AUTOMATIC RATIO SELECTION

Index

Contents

Overview

COPYING

steps in all >

Tap the [Auto Image] key

on the action panel.

The reduction or enlargement ratio is

automatically selected based on the

original size and the selected paper size.

The automatically selected ratio will appear

in the ratio display.

Manually select the paper tray, and place the original.

Place the original in the document feeder tray of the automatic document feeder, or on the

document glass.

SELECTING THE PAPER TRAY FOR COPYING

AUTOMATIC DOCUMENT FEEDER

DOCUMENT GLASS

To cancel the Auto Ratio Selection setting:

Tap the [Auto Image] key on the action panel to clear the check box like

To return the ratio to 100%:

Tap the [Copy Ratio] key to display the ratio menu, and then tap the [100%]

key.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 183 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: