manualshive.com logo in svg

Sharp MX-2314N, Operation Manual, Page: 230 / 836

Share
Download
Sharp MX-2314N Operation Manual Download Page 230

2-118

COPIER

Contents

WHITENING FAINT COLOURS IN COPIES (Suppress 
Background)

This feature is used to suppress light background areas.

1

Place the original.

Place the original face up in the document feeder tray, or face down on the document glass.

2

Select the special modes.

(1) Touch the [Special Modes] key.

(2) Touch the 

 keys to switch through the screens.

(3) Touch the [Colour Adjustments] key.

(4) Touch the [Suppress Background] key.

☞

[Colour Adjustments] KEY

 (page 2-115)

3

Select the suppress background setting.

(1) Adjust the background suppression level.

Touch the [+] key to suppress only faint background.
Touch the [-] key to suppress faint to dark background.

(2) Touch the [OK] key.

You will return to the special modes screen. Touch the 
[OK] key to return to the base screen of copy mode.

Light areas are 
suppressed.

Level [+]

Level [-]

The lightness level at which 
suppression takes place 
can be adjusted.

OK

OK

Cancel

Colour Adjustments

Suppress Background

Light areas of the original may be suppressed as background.

3

1

(1)

(2)

Summary of Contents for MX-2314N





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments