manualshive.com logo in svg

Sharp MX-2300N Guide, User Manual, Page: 59 / 786

Share
Download
Sharp MX-2300N Guide User Manual Download Page 59

58

REPLACING THE TONER CARTRIDGES

When toner runs low, "[

] Toner supply is low" appears in the display. It is recommended that you keep a set of 

new toner cartridges so that you can replace them quickly when toner runs out.

1

Open the front cover.

Locations of color toner cartridges

2

Pull the toner cartridge toward you.

Raise the toner cartridge lever and gently pull the toner 
cartridge horizontally toward you.
When pulling out the toner cartridge, pull it out gently. If the 
cartridge is pulled out abruptly, toner may spill out.

Example: Replacing the yellow toner cartridge

Hold the toner cartridge with both hands as shown and pull it 
out of the machine.

Ready to scan for copy.

(                 

Toner supply is low.

)

Change the toner cartridge.

(                )

Colors that are running low or have run out of toner are indicated in (

).

:Yellow  

: Magenta   

: Cyan  

: Black

Replace the toner cartridges of the indicated colors.

Y

M

C

Bk

If you continue to use the toner cartridge, the toner will eventually run 
out, the machine will stop and the following message will appear.

Yellow

Magenta

Cyan

Black

Summary of Contents for MX-2300N Guide



















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments