Sharp MX-2300N Guide, User Manual, Page: 578 / 786

26
TRANSMISSION USING THE SPEAKER
When the speaker is used to dial, the fax is sent after the number is dialed and the connection is made. If a person
answers, you will be able to hear his or her voice, but you will not be able to speak.
1
Place the original.
Place the original face up in the document feeder tray, or face
down on the document glass.
When the document glass is used, only one page can be
transmitted.
2
Touch the [Speaker] key.
You will hear the dial tone through the machine's speaker.
After touching the [Speaker] key, you can touch the [Speaker Volume] key to adjust the volume of the speaker. The
speaker volume changes each time the [Speaker Volume] key is touched. Adjust the volume to the desired level.
3
Enter the destination fax number.
(1) Touch the [Address Book] key.
(2) Touch the one-touch key of the desired
destination.
A group key cannot be used.
☞
CALLING UP A FAX NUMBER FROM THE ADDRESS
BOOK
(page 36)
If the fax number of the transmitting machine is not stored in the
Address Book, enter the fax number with the numeric keys.
☞
ENTERING A FAX NUMBER WITH THE NUMERIC KEYS
(page 35)
4
Wait until the connection is made and then
press the [BLACK & WHITE START] key (
).
Transmission begins.
To cancel transmission...
Touch the [Speaker] key before you press the [BLACK & WHITE START] key ( ). The line will be disconnected
and transmission will stop.
1 1
Quick File
File
Special Modes
Sub Address
Speaker Resend
Scan Send
Auto
Address Book
Ready to send.
Fax
Mode Switch
Image
Settings
Direct TX
Memory TX
Auto Reception
Fax Memory:100%
8 x11 1
/
2
Quick File
File
Special Modes
Speaker Resend
Scan Send
Auto
Address Book
Fax
Mode Switch
Speaker Volume
Fax Receive
Telephone mode.
Image
Settings
Fax Memory:100%
8 x11 1
/
2
(1)
Fax Receive
Condition
Settings
AAA AAA
CCC CCC
EEE EEE
DDD DDD
BBB BBB
FFF FFF
ABCD EFGHI JKLMN OPQRST UVWXYZ
1/1
Frequent Use
Cc To
Sort Address
(2)