manualshive.com logo in svg

Sharp MX-2300N Guide, User Manual, Page: 447 / 786

Share
Download
Sharp MX-2300N Guide User Manual Download Page 447

26

USING THE RESEND FUNCTION

The last 8 destination addresses used for Scan to E-mail and Internet fax transmissions are saved in memory and can 
be selected to resend to those destinations.

1

Touch the [Resend] key.

2

Touch the key of the desired address.

The last 8 addresses used for transmission are displayed.

• When the [Resend] key is touched and a destination selected, the mode of the selected destination is automatically 

selected.

• The following types of addresses are not stored for resending.

• A one-touch key in which multiple destinations are stored (group key).

• Scan to FTP, Scan to Desktop, and Scan to Network Folder destinations

• Broadcasting destinations 

• Addresses used only for BCC delivery 

• Destinations transmitted to using a program

Quick File

File

Special Modes

Address Entry

Resend

Address Book

Scan

Mode Switch

Image

Settings

Send Settings

Ready to send.

Scan

 8 x11

1 

/

 2

 Auto

Send

AAA AAA

No.01

No.02

No.03

No.04

No.05

No.06

No.07

No.08

GGG GGG

EEE EEE

CCC CCC

BBB BBB

DDD DDD

FFF FFF

HHH HHH

Cancel

Summary of Contents for MX-2300N Guide



















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments