Sharp MX-2300N Guide User Manual Download Page 443

Page: 443 / 786

USING A SEARCH NUMBER TO SPECIFY A
DESTINATION

A destination stored in the Address Book can be called up using the

key. This can be done in the base screen of

any of the modes or in the Address Book screen.

Touch the

key.

Enter the 3-digit search number of the
address with the numeric keys.

When the 3-digit search number is entered, the stored address
is called up and specified as a destination.

• The search number is the number that was stored when the destination was stored in the address book.

• If you do not know the search number, print the one-touch address list using "Sending Address List" in the system

settings.

• When entering search numbers such as "001" and "011", "0" can be omitted. For example to enter "001", enter "1"

and touch the

key or the [Next Address] key.

If an incorrect search number is entered...

Press the [CLEAR] key (

) to clear the number and enter the correct number.

Quick File

File

Special Modes

Address Entry

Resend

Scan

8 x11

Auto

Send

Ready to send.

Address Book

Scan

Mode Switch

Image

Settings

Send Settings

Summary of Contents for MX-2300N Guide



















































































































































































































































































































































































































































































































































































































































































































































































































Sharp MX-2300N Guide, User Manual, Page: 443 / 786

Search results

Summary of Contents for MX-2300N Guide

Reviews: