Sharp MX-2300N Guide, User Manual, Page: 277 / 786

85
ADDING INSERTS WHEN COPYING ON
TRANSPARENCY FILM (Transparency Inserts)
When copying on transparency film, the sheets may stick together due to static electricity. The transparency inserts
function can be used to automatically insert a sheet of paper between each sheet of transparency film, making the
sheets easy to handle.
It is also possible to copy on the inserts.
1
Place the transparency film in the
bypass tray.
Place the transparency film face down on the bypass tray.
Transparency film can only be placed in the bypass tray.
When transparency film is oriented horizontally, the rounded
corner should be at the front left. When oriented vertically, the
round corner should be at the rear left.
2
Open the paper settings screen.
(1) Touch the [Job Detail Settings] key.
(2) Touch the [Paper Select] key.
C
B
A
Inserts
Oriented
vertically Oriented
horizontally
2-Sided Copy
Output
Special Modes
File
Quick File
Full Color
Color Mode
Auto
Exposure
100%
Copy Ratio
Job Detail
Settings
8 x18
Plain
Auto
Original
Auto 8 x11
Paper Select
Special Modes
1
/
2
(2) (1)