manualshive.com logo in svg

Sharp MX-2300N Guide, User Manual, Page: 213 / 786

Share
Download
Sharp MX-2300N Guide User Manual Download Page 213

21

COPY COLOR MODES

This section explains how to select the color mode.
For a color original, set the color mode to Full Color.
If color originals and black and white originals are mixed together, set the color mode to Auto.

SELECTING THE COLOR MODE

Full Color

The original is copied in full color.

Single Color

The original is copied in the selected color only.
All colors in the original are changed to the selected color, which can be selected from green, 
blue, cyan, magenta, or yellow.

2 Color

Only the red areas of the original are changed to the selected color; colors other than red are 
copied in black. This lets you make copies that are more expressive than black and white copies.
Red, green, blue, cyan, magenta, or yellow can be selected.

Auto

A color original is normally copied in Full Color mode when the [COLOR START] key 
(

) is pressed.

However, if color originals and black and white originals are mixed together, follow the steps 
below to set the color mode to [Auto].
The discrimination point for detecting whether originals are color or black and white can be 
set using "Detect Standard in Auto Color Mode" in the system settings (administrator).

1

Place the original.

Place the original face up in the document feeder tray, or face 
down on the document glass.

2

Touch the [Color Mode] key.

3

Set the color mode.

(1) Select the color mode.

(2) Touch the [OK] key.

When auto mode is used, there may be some originals for which the mode is not correctly switched between full color 
mode and black and white mode. In this event, press the [COLOR START] key (

) and the [BLACK & WHITE 

START] key (

) as appropriate to manually switch between color copying and black and white copying.

1

1

Ready to scan for copy.

2-Sided Copy

Original  8 x11

1 

/

 2

0

Output

Special Modes

File

Quick File

Full Color

Color Mode

2.

3.

4.

1.

8 x11R

8 x14
11x17

8 x11

Auto

Exposure

100%

Copy Ratio

Job Detail

Settings

1 

/

 2

1 

/

 2

1 

/

 2

8 x11

Plain

1 

/

 2

Color Mode

OK

Full Color

Auto

Single Color

2 Color

(1)

(2)

Summary of Contents for MX-2300N Guide



















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments