manualshive.com logo in svg

Sharp MX-1100, User Manual, Page: 93 / 655

Share
Download
Sharp MX-1100 User Manual Download Page 93

93

OTHER PROBLEMS

Problem

Point to check

Solution

The touch panel 
screen is difficult to 
view.

Is the display contrast properly 
adjusted?

Touch the brightness adjustment key (

) on the 

system bar in the touch panel to adjust the brightness.

☞

SYSTEM BAR

 (page 15)

You were logged out 
without having 
performed logout 
yourself.

Did Auto Clear activate?

When user authentication is used, the currently logged 
in user will be automatically logged out if Auto Clear 
activates. (Except when in PC scan mode.)
Log in again.
If you are the administrator, you can change the time 
setting of Auto Clear or disable Auto Clear in "Auto 
Clear Setting".

➞

System Settings (Administrator) > "Operation 
Settings" > "Other Settings" > "Auto Clear Setting"

You forgot the 
administrator 
password.

Was the administrator password 
changed from the factory default 
setting?

Contact your dealer or nearest SHARP Service 
Department.
* For the factory default administrator password, see 

"TO THE ADMINISTRATOR OF THE MACHINE" in 
the Safety Guide. After changing the password, take 
special care to remember it.

Summary of Contents for MX-1100
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments