manualshive.com logo in svg

Sharp MX-1100, User Manual, Page: 89 / 655

Share
Download
Sharp MX-1100 User Manual Download Page 89

89

PROBLEMS RELATED TO QUALITY / PRINT RESULTS

Problem

Point to check

Solution

Lines appear in the 
scanned image.

Are the scanning areas of the document 
glass or automatic document feeder 
dirty?

Clean the scanning areas of the document glass or 
automatic document feeder.

☞

"CLEANING THE DOCUMENT GLASS AND 
AUTOMATIC DOCUMENT FEEDER" in the 
Maintenance Guide

Is the bypass feed roller dirty?

Clean the surface of the bypass feed roller.

☞

"CLEANING THE BYPASS FEED ROLLER" in the 
Maintenance Guide

Smudges appear on 
printed output.

Are you using paper that is not within 
the specifications?

Use SHARP-recommended paper. Using paper that is 
for other models or special paper that is not supported 
may result in misfeeds, creases, or smudges.

☞

"SUPPLIES" in the Safety Guide

Smudges appear on 
printed output.

Are you printing on pre-punched paper?

If the printed image overlaps the punch holes, smudges 
may appear on the reverse side of the paper following 
one-sided printing, or on both sides following two-sided 
printing. Take care that the image does not overlap the 
punch holes.

Does a message appear indicating the 
need for maintenance?

Contact your dealer or nearest SHARP Service 
Department as soon as possible.

Toner does not adhere 
well or creases appear 
in the paper.

Are you using paper that is not within 
the specifications?

Use SHARP-recommended paper. Using paper that is 
for other models or special paper that is not supported 
may result in misfeeds, creases, or smudges.

☞

"SUPPLIES" in the Safety Guide

Did you set the correct paper type?

Set the correct paper type in the tray settings. Make 
sure that the following has not occurred:

• Heavy paper is being used, but a paper type other 

than heavy paper is selected in the tray settings. (The 
image may disappear if rubbed.)

• Paper other than heavy paper is being used, but 

heavy paper is selected in the tray settings. (This may 
cause creases and misfeeds.)

☞

PAPER TRAY SETTINGS

 (page 77)

Is the paper loaded so that printing 
takes place on the reverse side?

If printing takes place on the wrong side of label sheets 
or transparency film, the toner may not adhere well and 
a clear image may not be obtained.

Print quality is poor.

Is "Toner Save Mode" enabled?

When "Toner Save Mode" is enabled, printing takes 
place using less toner and thus the print result is lighter. 
Check with your administrator.

Summary of Contents for MX-1100
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments