manualshive.com logo in svg

Sharp MX-1100, User Manual, Page: 412 / 655

Share
Download
Sharp MX-1100 User Manual Download Page 412

92

ERASING PERIPHERAL SHADOWS ON THE 
IMAGE (Erase)

The erase function is used to erase shadows on images produced when scanning thick originals or books. (This function 
erases the parts of the image where shadows tend to form. The function does not detect shadows and erase only the 
shadows.)

Scanning a thick book

Erase modes

Shadows appear here

Not using the erase 

function

Using the erase 

function

Shadows appear in the 
image.

No shadows appear.

• Shadows at the edges of the original can also be erased when the automatic document feeder is used.

• When using USB memory mode, connect the USB memory device to the machine before performing the procedure below.

1

Place the original.

Place the original face up in the document feeder tray, or face down on the document glass.

2

Specify the destination.

☞

2. ENTERING DESTINATIONS

 (page 25)

When scanning to USB memory in USB memory mode, there is no need to specify the destination. Go to step 3.

Edge Erase

Center Erase

Edge + Center Erase

Side Erase

Summary of Contents for MX-1100
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments