manualshive.com logo in svg

Sharp MX-1100, User Manual, Page: 363 / 655

Share
Download
Sharp MX-1100 User Manual Download Page 363

43

SENDING AN IMAGE IN USB MEMORY MODE

Follow the steps below to send a scanned image to a commercially available USB memory device that has been 
connected to the machine. This stores the file in the USB device.

• Consult your dealer or retailer for USB memory devices that can be used.

• When a default address is configured in "Default Address Setting" in the system settings (administrator), the mode cannot 

be changed. To switch to USB memory mode, touch the [Cancel] key in the touch panel and then follow the steps below.

1

Connect the USB memory to the USB 
connector (Type A) on the machine.

2

Place the original.

• When placing the originals, orient them as shown below.

* To place a large portrait-oriented original, place it as shown above in "Landscape orientation" and specify the 

placement orientation in step 4.

• Place 5-1/2" x 8-1/2" (A5) size originals in portrait (vertical) orientation (

). If placed in landscape (horizontal) 

orientation (

), an incorrect size will be detected. For a 5-1/2" x 8-1/2"R (A5R) size original, enter the original size 

manually.

• Originals cannot be scanned in succession from both the automatic document feeder and the document glass and 

sent in a single transmission.

A

B

A B

A

B

A

B

A B

AB

Document feeder tray

Place the original face up.

Portrait orientation*

Landscape orientation

Document glass

Place the original face down and align the corner 
with the tip of the arrow mark 

 in the top left 

corner of the document glass scale.

Originals

Summary of Contents for MX-1100
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments