manualshive.com logo in svg

Sharp MX-1100, User Manual, Page: 29 / 655

Share
Download
Sharp MX-1100 User Manual Download Page 29

29

TRAY SETTINGS FOR TRAY 1 AND TRAY 2

LOADING PAPER

Up to 1200 sheets of 8-1/2" x 11" or A4 size paper can be loaded in tray 1. Up to 800 sheets of 8-1/2" x 11" or A4 size 
paper can be loaded in tray 2.
For detailed information on the paper that can be loaded, see the specifications in the Safety Guide and "

PAPER TRAY 

SETTINGS

" (page 77) in the System Settings.

1

Pull out tray 1 - tray 2.

Gently pull the tray out until it stops.

2

Fan the paper.

Fan the paper well before loading it. If the paper is not fanned, 
multiple sheets may feed at once and cause a misfeed.

3

●

Tray 1

Load paper in the left and right trays.

Raise the paper guide and load the paper with the print side 
face down. The stack must not be higher than the indicator line 
(maximum of 1200 sheets).

●

Tray 2

Raise the paper guide and load the paper with the print side 
face down. The stack must not be higher than the indicator line 
(maximum of 800 sheets).
Be sure to return the paper guide to its original position after 
loading the paper.

Indicator 
line

Indicator 
line

Summary of Contents for MX-1100
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments