Sharp LL-T17A3, Operation Manual

Page: 20 / 132

20
WHITE BALANCE Menu
WH I T E B A L A N C E
C OOL S TD WA R M U S E R
R- CONTRAST
G- CONTRAST
B - CONTRAST
1 2 8 0 X 1 0 2 4
V : 6 0 H z H : 6 4 . 0 k H z
Notes:
- On settings other than [STD] not all graduations
can be displayed. To display all graduations, set
to [STD].
- If COLOR MODE is set to [sRGB] or [VIVID], no
other setting than [STD] can be selected.
- Use the buttons to select [COOL], [·], [STD],
[·], [WARM] or [USER].
- Selecting USER will display the setting values for
[R-CONTRAST], [G-CONTRAST] and [B-
CONTRAST], in order to make fine adjustments.
- Use the / MODE button to select
[R-CONTRAST], [G-CONTRAST] and
[B-CONTRAST].
- To go to the next menu: MENU button
COOL ....... Color tone bluer than standard
• ............. Color tone slightly bluer than standard
STD .......... Color tone standard setting
• ............. Color tone slightly redder than standard
WARM ...... Color tone redder than standard
USER
R-CONTRAST ..... button for blue-green
button for red
G-CONTRAST ..... button for purple
button for green
B-CONTRAST ..... button for yellow
button for blue
Adjusting the screen display and speaker volume
MODE SELECT Menu
M O D E S E L E C T
O S D H - POS I T I ON
O S D V - POS I T I ON
S C A L I NG 3
I N P U T V E S A M A C
4 0 0 L I NE S 6 4 0 7 2 0
L A NGU A G E
1 2 8 0 X 1 0 2 4
V : 6 0 H z H : 6 4 . 0 k H z
Notes:
- Depending on the resolution of the input signal,
even if menu options can be selected, the display
may not change.
- To choose a menu option: / MODE button
- When adjustment complete: MENU button
OSD H-POSITION (OSD horizontal position)
The position of the OSD display can be moved to
the left and right. ( buttons)
OSD V-POSITION (OSD vertical position)
The position of the OSD display can be moved up
and down. ( buttons)
SCALING (Level of scaling)
The sharpness of the image can be adjusted. (
buttons)
Note:
- When the display mode is set to less than
1280 x 1024 pixels, the display is enlarged to
cover the whole screen (i.e. the side ratio of the
display may change).
INPUT
When connecting a Power Macintosh, set to [MAC].
( buttons)
400 LINES (degree of resolution)
You can specify the horizontal resolution of a 400-
line screen when using US text, etc. ( buttons)
640: 640 X 400 dot mode
720: 720 X 400 dot mode (US text etc.)
Note:
- As the resolution input for other than 400 lines is
done automatically, there is no need to set it.
LANGUAGE
You can chose the language used in OSD Menu.
1. Press the button.
The Language Selection Menu will be displayed
on the screen.
2. Use the / MODE button to choose a language.
3. Press the MENU button.
Language Selection Menu will disappear.
02_LL-T17A3_gb.p65 9/12/2002, 6:02 PM 20