30
LC-43LB601U / LC-50LB601U / LC-43LB601C / LC-50LB601C
43" / 50" Full HD LED 1080p Sharp Roku TV
Digital audio using the HDMI1(ARC) jack
Your TV can send sound to an ARC device, like an AV receiver, to create a home theater that uses two or more speakers.
When you connect external speakers or a sound bar, sound plays through your TV speakers and the external speakers or
sound bar.
1
Make sure that your TV’s power cord is unplugged and the digital speaker system or sound bar is turned off.
2
Connect an HDMI® cable (not provided) to the
HDMI1(ARC)
jack on the back of your TV and to the
HDMI IN
jack on the
digital speaker system or sound bar.
3
Plug your TV’s power cord into a power outlet, then turn on your TV.
4
Turn on the digital speaker system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the digital speaker system or sound bar.
5
To turn off your TV speakers, on the
Home
menu, press or to highlight
Settings
, then press
OK
. Highlight
Audio
,
then press
OK
. Highlight
TV speakers
, then press
OK
. Press
OK
to remove the check from the
TV speakers enabled
check box.
6
To configure the
HDMI1(ARC)
jack to output sound to an ARC device, on the
Home
menu, press or to highlight
Settings
, then press
OK
. Highlight
System
, then press
OK
. Highlight
Control other devices (CEC)
, then press
OK
.
Highlight
HDMI ARC
, then press
OK
to check the box.
AUDIO OUT
AV IN
VIDEO
AUDIO
L
R
ANT
/
CABLE
HDMI2
HDMI1(ARC)
On your TV
ARC audio device
Sound bar
HDMI® cable
connector
HDMI1(ARC)
jack
Back of TV
HDMI® cable
