Sharp LC-32LB150U User Manual Download Page 33

Page: 33 / 82

Sharp 32" LED TV

www.sharpusa.com

Connecting a USB flash drive

To connect a USB flash drive:

Plug a USB flash drive into the

USB

port on the side of your TV.

If your TV is turned on when you connect the USB flash drive, press

to select

Yes

in the message that

appears, then press

ENTER

. The

PHOTOS

menu opens.

If you switch to a different video input source after you plug in the USB flash drive and want to switch back to
the drive, press

INPUT

to open the

INPUT SOURCE

list, press

to select

USB (Photos)

, then press

ENTER

The

PHOTOS

menu opens.

Caution

Do not remove the USB flash drive or turn off the TV while using the USB
flash drive. You may lose data or damage the USB flash drive.

Note

The

PHOTOS

viewer only supports JPEG format images (with “.jpg” file

extensions) and not all JPEG files are compatible with your TV.
For more information, see “

Using a USB flash drive

” on page

USB flash drive

Side of TV

Summary of Contents for LC-32LB150U



















































































Search results

Summary of Contents for LC-32LB150U

Reviews:

Related manuals for LC-32LB150U

Brands by name

Popular brands

Sharp LC-32LB150U, User Manual

Search results

Summary of Contents for LC-32LB150U

Reviews:

Related manuals for LC-32LB150U

Brands by name

Popular brands