Sharp LC-26SA1E Service Manual Download Page 34

Page: 34 / 164

LC-26SA1E/RU, LC-32SA1E/RU

5 – 19

If “NO RESPOND” has been selected, “MENU” key, of remote control, is inoperative.

8. ON SCREEN DISPLAY [YES

↔

NO]

If “NO” has been selected, the On Screen Display does not appear.

9. INPUT MODE START [ NORMAL

→

TV (X)

→

INPUT1

→

INPUT2

→

INPUT3

→

INPUT4

→

INPUT5

]

When any other item than “NORMAL” has been selected, the sets will start in a selected input mode at the next power-on.

10.INPUT MODE FIXED [VARIABLE

→

FIXED]

“FIXED” has been selected, any channels and input modes other than those selected at the start mode cannot be picked up.

11. RESET

Cancel all Public Mode settings. (It returns to the factory settings)

12.EXECUTE

Select this item, and press cursor RIGHT/LEFT keys on the remote control or VOL(+)/(-) keys on the LCD TV for confirmation the functions set-
tings.

Summary of Contents for LC-26SA1E





































































































































































Search results

Summary of Contents for LC-26SA1E

Reviews:

Related manuals for LC-26SA1E

Brands by name

Popular brands

Sharp LC-26SA1E, Service Manual

Search results

Summary of Contents for LC-26SA1E

Reviews:

Related manuals for LC-26SA1E

Brands by name

Popular brands