Sharp LC-17SH1E, Operation Manual, Page: 18 / 40

18
Manual Tuning
How to tune a station to channel 2 position.
1. Select MANUAL ADJUSTMENT. Then press .
2. Press or until the picture appears on screen. If this is
not your desired channel, press or until your desired
channel appears. If you need to make the picture clearer,
use
or (FINE TUNING). Then press OK .
3. Press or to select channel position No.2, then press
OK .
4. Repeat steps 2 through 3 until all the required channels have been stored.
5. When all desired channels have been set in your required position, press MENU three times to
return to normal TV screen.
+0
: F.TUNE
: SET OK
: SEARCH
: RETURN MENU
+0
: SELECT
: RETURN MENU : SET OK
Presetting the Channels
Channel
Position
Station
1
BBC 1
2
BBC 2
3
ITV
4
Channel 4
5
Channel 5
6
Satellite/Cable
(if available)
Note:
It is recommended that you store the stations you tune in the order shown in the table below.
If you have your Satellite/Cable, etc. connected via a SCART lead to this VCR, then press
(INPUT) to
select it, rather than tuning it in to channel 6.
3U40101A P15-23 4/13/05, 2:02 PM 18