Sharp LC-17SH1E, Operation Manual

Page: 10 / 40

10
Inserting Battery
• Open the battery compartment cover in the direction of the arrow.
• Install two “AA” batteries (supplied), paying attention to the polarity
diagram in the battery compartment.
• Replace the compartment cover.
Operation
• Aim the remote control at the remote sensor and
press control buttons to operate.
• Operate the remote control within 30 ° angle on either
side of the remote sensor, up to a distance of Approx.
7 meters.
Notes:
• Do not leave the remote control unit exposed to direct sunlight or in hot or humid places.
• The remote control unit uses infrared beams to transmit signals, so sunlight or fluorescent light on the
remote sensor may shorten the operating distance.
• Incorrect use of batteries may cause them to leak or burst. Read the battery warnings and use the
batteries properly.
• Do not mix old and new batteries.
• Remove batteries if the remote control will not be operated for an extended period of time.
Approx. 7 metres
Remote Control
3U40101A P07-14 4/13/05, 2:02 PM 10